Product Configurator > MAC



MAC (Multisurfaces Active Coating) is an ultra-thin, waterproof, universal transparent surface coating that reduces the adhesion of dirt.    It does not change the look and touch feel of the surfaces of: metal, plastic, glass, natural and synthetic fabrics, leather, wood, paper, etc.

MAC gives the surface a repulsive action that protects against contaminants, both of organic and inorganic nature, making the surfaces easy to clean and water-repellent. It resists harsh atmospheric agents, sudden changes in temperature (freeze-thaw), moderately alkaline or acidic substances, showing excellent resistance to ultraviolet rays and normal cleaning cycles.   If it is not subjected to mechanical abrasion, it may last for several years after its application. It does not require the use of specific detergents.

MAC can be applied to both internal and external glass surfaces, without creating streaks, to improve their protection against dirt and harsh atmospheric agents, reducing maintenance and cleaning procedures.

It can also be applied to the surface of photovoltaic panels, to give greater cleanability and resistance to dirt, as well as act as an anti-reflective coating, thus increasing the efficiency of the panel itself. Some tests at our customers have shown an increase in efficiency of 5%.

Main Properties


  • Increased water repellency
  • Anti-adherent
  • Highly transparent and adherent to multi surfaces
  • Resistant to high temperature range (-50°C to +250°C)


  • It creates an ultra-thin (nanometric) coating on the surface, so water does not wet the surface
  • Easily cleanable
  • Applicable on glass and photovoltaic panels
  • It does not stain, discolor or stiffen the treated material
  • Possibility of use in harsh environments with high temperatures


  • No stagnant wetlands are created
  • Less maintenance and more simplified
  • Improves resistance to dirt and increases the efficiency of photovoltaic panels
  • It protects all types of surfaces without modifying the aesthetics of materials
  • Large number of potential applications


MAC is supplied in:

  • 250ml plastic containers 
  • 500ml plastic containers 
  • 1L plastic containers
  • 50ml glass packs

Storage and shelf life

MAC must be stored in the original packaging in a dry and cool place (with a temperature not higher than 25°C and not lower than 5°C). In this way the product can be stored for 12 months.

Usage tips

MAC is ready to use (do not dilute with solvents or other liquid substances).
MAC can be applied nebulized (spray) directly on the surfaces with an airbrush or industrial spray systems or manually with a microfiber cloth.


  • DO NOT apply in windy conditions
  • DO NOT apply if the surface is damp or wet (the dew point must NOT be on the surface to be treated)
  • DO NOT apply on surfaces that are too hot or exposed to the sun, to prevent the solvent from evaporating too quickly and creating unwanted accumulations of product
  • Optimal environmental conditions: temperatures between 5°C and 30°C and relative (RH) humidity not exceeding 80%.


Before applying the product, make sure that the surfaces are dry and thoroughly clean.
In the case of glass surfaces, it may be necessary to use cleaning products based on cerium oxide, to remove dirt in depth and ensure better adhesion of the treatment.

ACTIVATION TIMES: MAC crosslinks and forms an ultra-thin and transparent coating within 4 hours of application. Its protective action is optimal 1 or 2 days after application.

YIELD: MAC has a yield of 100m2 for each kg of product

MAC does not contain classic organic solvents but silane-based solvents

ATTENTION: consult the product Safety Data Sheet.